Drive-In Racking Specifications
Technical specifications of Perkasa Racking drive-in racking: SHD 120 frame, JIS G3131/G3101 steel, 100 mm support rail, plate thickness, load, and finishing.
Specifications are where a manufacturer’s quality becomes concrete. Two racks can look equally solid yet perform very differently — the difference lies in the frame, the steel, the plate thickness, and how completely the bracing is installed. Here are the technical standards behind every unit we build.
Key specifications: SHD 120 upright frame (largest in its class) manufactured in one piece up to 13,000 mm with no splice; plate thickness 2.0/2.5/3.0 mm matched to design load; 100 mm support-rail footprint; full top-tie and back bracing; JIS G3131/G3101 structural steel; powder coating or hot-dip galvanized finishing; ISO-certified production.
Specifications We Manufacture
Capacity means nothing without a structure you can trust. These are the technical standards behind every drive-in racking unit from Perkasa Racking (PT. Tangguh Adi Perkasa TAP) — consistent across every project, with no drop in quality wherever your warehouse is.
| Component | Specification & Value to You |
|---|---|
| Upright frame | SHD 120 — the largest profile in its class, manufactured in one piece up to 13,000 mm with no splice. No joint means no weak point. |
| Plate thickness | 2.0 / 2.5 / 3.0 mm, matched to design load — never thinned to cut cost. |
| Support rail | 100 mm footprint, the widest in its class — a broader, more stable bearing surface for pallets. |
| Top tie & back bracing | Fully installed, not a single member omitted — structural safety comes first. |
| Finishing | Powder coating (dry warehouse) or hot-dip galvanizing (cold storage). |
| Material | JIS G3131 & JIS G3101 steel — certified structural grade, not low-grade iron. |
Why the One-Piece Frame Matters
On drive-in racking, the upright is the column that carries the full vertical load of the pallet stack. Every splice on that column is a potential weak point — a place where stress concentrates and buckling can begin. By manufacturing the SHD 120 frame in one piece up to 13,000 mm, we eliminate those weak points, producing a column that is stronger, straighter, and more precise. This is only possible for a factory with true long-length forming capability — not for an assembler joining short sections.
Finishing for Every Environment
| Finishing | Best For | Why |
|---|---|---|
| Powder coating | Dry, ambient warehouses | Hard, clean protective layer at efficient cost |
| Hot-dip galvanizing | Cold storage, humid areas | Zinc layer protects steel through-and-through against corrosion |
Because we run both processes in-house, we recommend — and produce — the finish that genuinely matches your environment, rather than whatever happens to be in stock.
Request the Full Technical Data
The figures above are the standard behind every unit, but the exact configuration — height, lane depth, number of levels, load per pallet position, and finishing — is engineered for your warehouse. As the manufacturer, we can provide detailed drawings and structural calculations for your project. Send us your pallet dimensions, weights, and building height, and we will return a specification tailored to your operation.
See full specifications, types, and order drive-in racking directly on our main site.
Frequently Asked Questions
The questions international buyers ask most before ordering drive-in racking.
What steel grade is used in your drive-in racking?
How tall can the upright frame be without a splice?
What finishing options are available?
What load capacity can drive-in racking handle?
Looking for Drive-In Racking in Indonesia?
High-density, factory-direct, ISO-certified — from our plant in Indonesia to warehouses worldwide. Talk to our team on WhatsApp.
Request a Quote